تدريس اساسيات الهندسة الميكانية والتصنيع وبعض مقررات الهندسة الصناعية

Being an associate professor and Doctor in Mechanical Engineering and Robotics, I give private lessons at the following level: * Kinematic Model Course (direct or inverse) * Dynamic Model Course (direct or reverse) * Static Model Course (direct or inverse) * Course Planning the trajectory * Robot Control Course * Programming course on Matlab or RoboStudio.

In these Engineering Classes, I guide, mentor, and facilitate your growth and intuitive technical understanding. I share my experiences with Aerospace/Aeronautical/Mechanical/Electrical Engineering, helping you develop your skills and techniques to tackle any problem, whilst adapting our lessons to your natural method of learning. Contact me here to introduce yourself and tell me more about the topics that you would like additional support with. This could be, for example, Aero/ Flight Dynamics, Control Systems, Dynamic Structures, Business Data Analysis, or any other topics. Whatever university you are studying at, I am certain that you will leave our sessions fulfilled, inspired, and driven to take on any challenge that may come your way. Contact me now for my availability, so that we can organize your first session as soon as possible. I look forward to meeting you! __________________________________________________________________________________ Previously supported students from top universities such as: UK: - Imperial College London (+ Business School) (ICL) - University College London (UCL) - King's College London (KCL) NL: - Delft University of Technology (TUDelft) - University of Amsterdam - University of Groningen SW - ETH Zurich - Swiss Federal Institute of Technology AU - Queensland University of Technology - University of Queensland - Griffith University __________________________________________________________________________________ A little about myself: My name is Anh; I was born and raised in the U.K. and I have over 8 years of international experience, tutoring Middle School to University Level Maths, Sciences, and Engineering, with 4 years of working experience in the Aerospace and Maritime industry. I have a fun, ambitious, and outgoing personality with a passion for music, cooking, and trying new things. Whilst teaching and mentoring, I am patient and adaptable to the needs of each of my students. I am working as an Engineering Specialist/Consultant, holding: - a degree as a Master of Aeronautical Engineering from Imperial College London, - A*A*A* A-Level Further Maths and Physics, with, - straight A*s in (GCSE) Maths, Physics, Chemistry, Biology, English, Geography. I was also previously mentored and tutored myself and having been through the problems and achievements first-hand, I want to help others do so as well.

Thermodynamics deals with heat, work, and temperature, and their relation to energy, entropy, and the physical properties of matter and radiation. The behavior of these quantities is governed by the four laws of thermodynamics. The science of thermodynamics is a very sweet and conceptual science. Many concepts that we face in reality are examined in thermodynamics. Laws of thermodynamics, entropy generation and analysis and investigation of various thermodynamic cycles, etc. are things that are taught in class. references : Cengel , Borgnakke.

Need help with mechanics, physics or thermodynamics? As a civil engineer, 31, I am happy to help you! Learn at your pace and with many examples to clarify the learning material. I have years of experience in learning simple and complex material. The lessons run as follows. First, we look together for the student's biggest stumbling blocks. These can be related to the subject matter as well as to the study method. From there, I work at the pace of the student and encourage them to ask as many questions as possible. I also give tips and tricks, and improve their working methods where necessary. During the lesson I give many examples to make the subject matter more interesting and we solve exercises together. Once practiced from the lesson, I mastered challenging exercises to also test the deeper understanding of the subject matter. In this way I try to optimally prepare the student for his/her exam test. However, learning should also be enjoyable. That is why I always strive for a bond with the student through a spontaneous and positive approach. I am also very patient. All this to solve and improve the problems. Are you interested? Don't hesitate to receive me! Please come! Tim

===================Satisfied or refunded======================= Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming). Computational Sciences and Technology SNT IS engineering sciences Numerical and computer science SNI Digital electronics Analog electronic electromagnetism Signal processing and data acquisition Automatic (discrete, continuous) electrical engineering (transformers, electrical machines, switching power supply) C/C++ Programming, Assembler, ARM, STM32 renewable energy (wind, PV-solar) RDM - strength of materials mechanics of solids Python and SYSML PIC microcontroller Microprocessor MATLAB, proteus Preparation for competitions Supervision of graduation projects CAPLP Electrotechnical and Electronic Electrical Engineering CAPLP and BTS subjects and answers Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020 CORRECTION OF BTS TESTS

Solid mechanics is a key area of mechanical engineering which have key ingredient of mathematics and physics. I love to teach and share the knowledge gained over these years on Mathematics, Physics and various courses in mechanical engineering.

I give private lessons in Mathematics - Analysis - Matrices - Statistics - Algebra - Geometry - Physics - Chemistry - thermodynamics-fluid mechanics-RDM to students in French or Arabic programs. Homework help for Baccalaureate students. preparation for the competition. For more information, do not hesitate to contact me, guaranteed response in a few minutes up to 6 hours maximum.

I hold a PhD in Mechanical Engineering and currently, I am working as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology). I have extensive experience in teaching various Mechanical design packages, including LS-DYNA, ANSYS, APDL programming, ABAQUS, MATLAB, SolidWorks, Cura, and Symbolic MATLAB. Some of the finite element modeling and numerical simulations I have worked on include: - Multiscale finite element modeling for fatigue crack propagation in porous materials. - Analysis of multiple-layer sandwich structures' resistance to bird-strike impact [Read paper]. - Investigation of debonding propagation in aluminum and glass/epoxy composite joints under fatigue loading using Fracture Mechanics principles. - Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials. - Study of the effect of material type, stacking sequence, and impact location on pedestrian head injury in collisions. If you have any additional questions before starting the class, please don't hesitate to ask me. I am here to help! :)

I am a true believer in bringing academic skills and techniques to life in order to best understand and tackle future problems within the subject. Having both studied and applied teaching techniques to previous students, I pride myself on being able to identify which form of learning works best. A lesson will usually last 1-2 hours depending on the content we will be working through. The first session will be to understand what aspects of the subject(s) they understand or would like to focus on, followed by time to best identify how they learn best, allowing me to tailor the tutoring experience. After getting A*s and As in Maths, Further Maths, and Physics A-Levels, I went on to complete a bachelor's degree in Mechanical Engineering from Cardiff University. After graduating, I joined a pharmaceutical company, taking on multiple roles over the 4 years working there. With both academic and real-world knowledge in engineering and tutoring engineering, and experience in tailoring teaching methods to maximize a student's learning ability

I am doing a PhD. I can explain everything in the mechanical engineering curriculum, such as thermodynamics, work transition, fluid mechanics, mechanics, Autocad, NX, Solidworks, Matlab, Ansys. Also math, linear algebra, differential equations. I have been working as a research assistant for five years.

3D Modelling Tutoring: Learn to Create in 3D Take your first steps into the world of 3D design or sharpen your skills with our personalised 3D Modelling Tutoring. Whether you're a beginner or looking to improve, we'll guide you through leading software like Onshape, Fusion360, or SOLIDWORKS. What you’ll learn: 3D geometry, texturing, lighting, and shading. Rendering and exporting models for 3D printing. Who’s it for: Beginners, students, or professionals in design, animation, or architecture. Flexible scheduling with tailored, one-on-one lessons to fit your needs.

Teaching All Engineer Courses for Mechanical Engineering Students which will suits also Mechanical Engineering Students, Electrical Engineering Students and Computer Engineering Students. It will include theoretical teaching lessons and practical teaching lessons and also include many software such as Matlab.

Teacher of Mathematics, Physics, and Mechanical Engineering, with over 10 years of experience. Mechanical vibrations, material resistance, mechanical design, control, robotics, Dynamics, control, vibration, robotics, MATLAB and others Courses instructed: 1.Introduction to Robotics (MEE 4201) 2. Introduction to Mechatronics (MEE 1209) 3. Engineering Mechanics-I and II (Statics &Dynamics), (ME2108&ME2203) 4.Engineering Drawing (GE2207) 5. Machine Design (ME4101) 6. Automation (MEE5104) 7. Engineering Drawing II (SolidWroks), (GEN 126) 8. Robotics (MME 106, MS level)

Hi, I offer courses in mathematics, physics, as well as mechanical engineering courses for all levels (high school and university). As an engineer with a doctorate in mechanical engineering, I have a solid experience in teaching and I am passionate about supporting pupils and students towards success. Whether you are looking for academic support, exam preparation, or to deepen your knowledge in these subjects, I am here to help you with teaching methods adapted to your needs. Feel free to contact me for more information !

Thermodynamics is one of the basic courses for mechanical engineers and deals with the basic laws of energy transfer from one system to another. The scientific material according to the requirements of your university, but in general it includes the zeroth, first and second laws of thermodynamics. It also includes an explanation of availability and exergy. In addition, of course, to thermal power plants. With 8 years of teaching experience I can present information in a smooth and easy way.