Technology (Technical drawing, information chain, energy chain.........)

I am proficient in teaching analog and digital electronics, covering components, integrated circuits and embedded systems. - Fundamentals of electronics: Definitions, basic concepts, Kirchhoff's laws. - Electronic components: Resistors, capacitors, inductors, diodes. - Operational amplifiers: Operation, characteristics, applications. - Basic analog circuits: Amplifiers, filters, oscillators. - Introduction to digital electronics: Binary logic, logic gates, combinational circuits. - Numbering systems: Conversion between bases, adders, subtractors. - Transistors: Bipolar transistors, field effect transistors, characteristics, applications. - Transistor amplifiers: Configuration, gain calculations, stability. - Analog integrated circuits: Voltage regulators, A/D and D/A converters. - Sequential digital systems: Flip-flops, registers, counters. - Microcontrollers and microprocessors: Architecture, basic programming, interfaces. - Analysis of electronic circuits: Frequency and time analysis methods. - Advanced analog circuits: Differential amplifiers, power amplifiers, active filters. - Modulation and demodulation techniques: AM, FM, PM. - Embedded systems: Design of real-time systems, communication between peripherals. - Test and measurement techniques: Oscilloscope, spectrum analyzer, signal generators. -

Being an associate professor and Doctor in Mechanical Engineering and Robotics, I give private lessons at the following level: * Kinematic Model Course (direct or inverse) * Dynamic Model Course (direct or reverse) * Static Model Course (direct or inverse) * Course Planning the trajectory * Robot Control Course * Programming course on Matlab or RoboStudio.

Hi all, My name is Mehrez, I am 25 years old and I am a doctoral student in electrical engineering. I offer private lessons, individual or in groups, at home: - Physics for high school students. - Electrical and mechanical for 3rd year and baccalaureate students. Please do not hesitate to contact me for any questions or information.

Are you facing challenges with your current engineering courses? Are you in a position where you need to resit an exam? Are you considering using professional tutoring/mentoring support to excel in the upcoming (resit) exams? If any of these topics resonate with you, these classes may be what you're looking for. In these special, tailored classes, we will uncover what is it that is potentially holding you back in your performance and understanding, and attack these issues head-on. With this, I will guide, mentor, and facilitate your growth and intuitive technical understanding further. I share my experiences with Aerospace/Aeronautical/Mechanical/Electrical Engineering, helping you develop your skills and techniques to tackle any problem, whilst adapting our lessons to your natural method of learning. Contact me here to introduce yourself and tell me more about the topics that you would like additional support with. This could be, for example, Aero/ Flight Dynamics, Control Systems, Dynamic Structures, Business Data Analysis, or any other topics. Whatever university you are studying at, I am certain that you will leave our sessions fulfilled, inspired, and driven to take on any challenge that may come your way. Contact me now for my availability, so that we can organize your first session as soon as possible. I look forward to meeting you! __________________________________________________________________________________ Previously supported students from top universities such as: UK: - Imperial College London (+ Business School) (ICL) - University College London (UCL) - King's College London (KCL) NL: - Delft University of Technology (TUDelft) - University of Amsterdam - University of Groningen SW - ETH Zurich - Swiss Federal Institute of Technology AU - Queensland University of Technology - University of Queensland - Griffith University __________________________________________________________________________________ A little about myself: My name is Anh; I was born and raised in the U.K. and I have over 8 years of international experience, tutoring Middle School to University Level Maths, Sciences, and Engineering, with 4 years of working experience in the Aerospace and Maritime industry. I have a fun, ambitious, and outgoing personality with a passion for music, cooking, and trying new things. Whilst teaching and mentoring, I am patient and adaptable to the needs of each of my students. I am working as an Engineering Specialist/Consultant, holding: - a degree as a Master of Aeronautical Engineering from Imperial College London, - A*A*A* A-Level Further Maths and Physics, with, - straight A*s in (GCSE) Maths, Physics, Chemistry, Biology, English, Geography. I was also previously mentored and tutored myself and having been through the problems and achievements first-hand, I want to help others do so as well.

Need help with mechanics, physics or thermodynamics? As a civil engineer, 31, I am happy to help you! Learn at your pace and with many examples to clarify the learning material. I have years of experience in learning simple and complex material. The lessons run as follows. First, we look together for the student's biggest stumbling blocks. These can be related to the subject matter as well as to the study method. From there, I work at the pace of the student and encourage them to ask as many questions as possible. I also give tips and tricks, and improve their working methods where necessary. During the lesson I give many examples to make the subject matter more interesting and we solve exercises together. Once practiced from the lesson, I mastered challenging exercises to also test the deeper understanding of the subject matter. In this way I try to optimally prepare the student for his/her exam test. However, learning should also be enjoyable. That is why I always strive for a bond with the student through a spontaneous and positive approach. I am also very patient. All this to solve and improve the problems. Are you interested? Don't hesitate to receive me! Please come! Tim

Découvrez les fondements théoriques du génie mécanique et électrique dans ce cours en ligne. Explorez les principes de la mécanique des solides et des fluides, de l'électricité et de l'électronique, et apprenez à concevoir et à analyser des systèmes complexes. Ce cours est idéal pour les étudiants et les professionnels qui souhaitent approfondir leurs connaissances en génie mécanique et électrique. Les cours seront dispensés en ligne, avec des supports de cours et des exercices interactifs pour vous aider à mieux comprendre les concepts.

Welcome to Electronic Circuits, also known as Fundamentals of Microelectronic Circuits! This course introduces you to the principles and operation of essential electronic components like diodes, transistors, and operational amplifiers. We’ll explore their roles in circuit design, analyze small-signal and large-signal behavior, and dive into real-world applications of amplifiers, switches, and oscillators. Key topics include: Semiconductor Device Basics Diodes BJT Transistors MOSFET Transistors Biasing Techniques and Small-Signal Models Operational Amplifier Design and Applications Introduction to Analog and Digital Circuits Whether you are studying online or onsite, this course blends theory with hands-on problem-solving to build your confidence in analyzing and designing electronic systems. I’m here to support you every step of the way. If you have questions, need help with concepts, or want to discuss electronic circuit applications, feel free to reach out. Let’s make learning engaging and rewarding!

The student will be able to understand the material comfortably and easily with follow-up and supervision to obtain the best results with an enjoyable method of explanation to avoid boredom and to learn about the beautiful aspects of physics and mathematics that exist around us and to memorize all the laws that enable the student to understand and know the sciences of physics and mathematics and apply them....

Research on business management, accounting and economics. I am a graduate of Business Management with distinction and i am capable of teaching this course fluently. General Mechanical Engineering courses..... I am a 4th year drop out of this filed but enthusiasts with the field of study. General Computer Engineering, Computer Science and Software Engineering. I am self taught compute science professional.

I give private lessons in Mathematics - Analysis - Matrices - Statistics - Algebra - Geometry - Physics - Chemistry - thermodynamics-fluid mechanics-RDM to students in French or Arabic programs. Homework help for Baccalaureate students. preparation for the competition. For more information, do not hesitate to contact me, guaranteed response in a few minutes up to 6 hours maximum.

I am an associate professor of electrical engineering I offer courses in everything related to the discipline of electrical engineering: CPGE / BTS / DUT / IUT / DTS / UNIVERSITY / Technical high school ARCHITECTURE OF A PROGRAMMED SYSTEM INTERNAL AND EXTERNAL APPEARANCE INPUT/OUTPUT MANAGEMENT timeouts timers, watchdog PIC 16F8X 16F8XX PROGRAMMING INTERRUPTIONS MANAGEMENT ASSEMBLER PROGRAMMING PROGRAMMING IN C MACHINE CONTROL SOFTWARE SIMULATION MPLAB MIKROC ISIS/PROTEUS

The Electrical and Electronics Circuits Workshop equips engineers with hands-on skills in designing, analyzing, and troubleshooting circuits. It covers key topics like amplifiers, rectifiers, microcontrollers, and practical tools, blending theory with real-world applications.

Electrical engineering: - Single-phase sinusoidal regime and three-phase sinusoidal regime - transformers - The direct current machine - The asynchronous machine - The synchronous machine Power electronics: - AC/DC converter (Rectifiers) - DC/DC converter (Choppers) - DC/AC converter (Inverters) - AC/AC converter (Dimmers) Analog and digital electronics: - Semiconductors (diodes, transistors, etc.) - Operational amplifiers - analog and digital filters - converters: CAN and CNA - Combinational circuits and sequential circuits Sensors and instrumentation. Signal processing Data transmission Automatic: - Concepts on automatic - The correctors: P, PI, PID, phase advance, phase delay, ... - Regulation and servoing Control of electrical machines: - Direct current machine control - Control of the asynchronous machine - Control of the synchronous machine Industrial automation and IT

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics. Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects. Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies. Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life. Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life. Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently. Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

I hold a PhD in Mechanical Engineering and currently work as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology). My extensive teaching experience covers a wide range of engineering courses, including: - Mathematics: algebra, linear algebra, probability, calculus, differential equations, intellectual math, and advanced engineering mathematics. - Mechanical Engineering: Statics, Dynamics, Mechanics of materials, Mechanical design, control, vibration, Fluid Mechanics, Thermodynamics, Heat transfer, Engineering drawing, Applied Mechanics, Composite Structures, Flight, Machine Elements, Manufacturing, 3D printing, and more. - Physics: mechanics, momentum and energy, electricity, charge and current, electric and magnetic fields, waves, particle physics, nuclear decay, astrophysics, cosmology, oscillations, etc. - CAD/CAM Software: Autocad, Solidworks. - Mechanical Design Packages: ANSYS, APDL programming, ABAQUS, MATLAB, Symbolic MATLAB, LS-DYNA. My research and teaching interests are diverse, including: • Additive manufacturing • Mechanical metamaterials • Acoustical metamaterials • Electromagnetic metamaterials • Aeroacoustics • Soft matter and soft robotics • Fatigue and fracture mechanics • Experimental mechanics • Multiscale numerical modelling • Biomaterials • Porous materials • Manufacturing of medical devices and implants • Deep learning • Image processing • Topology optimization • Origami and Kirigami structures • Self-folding and self-assembly structures • Tissue engineering • Permeability in porous materials • Fluid-Solid Interaction I understand that not all teachers excel in teaching Engineering and Mathematics courses and explaining their importance to students. Courses with strong mathematical backgrounds may become boring for students who lack a solid mathematical basis. To address this, I take a student-centered approach, starting from the basics to actively engage all students, including those with weaker mathematical backgrounds. I also provide practical examples to demonstrate the real-world significance of what they are learning, inspiring and fostering their interest in the subject matter. If you have any additional questions before starting a class, please feel free to ask me. I am here to assist! :)