Créateurs de l'Avenir: génie mécanique et Electrique

Electrical engineering forms the backbone of today's technology. From the distribution of electricity worldwide to the implementation of microcircuits, electrical engineering describes and provides the fundamentals of all principles pertaining to electronics, telecommunications, power systems, renewable energy, machines and mechatronics, etc. Having graduated as an Electrical Engineer I am offering Electrical Engineering I and II tutorials for beginner students at the University of Applied Sciences Upper Austria. I have experience in elaborating and describing the following thematics which are often problematic for students who seek a degree in Electronics Engineering, Computer Engineering, Telecommunication Engineering, and Electrical Engineering: •Electrical Engineering Basics •Conductor, Isolator, and Semiconductor Physics •AC Passive components: Inductors, Capacitors and Resistors •DC Circuit Analysis (Thevenin, Kirchhoff and Helmholtz approaches) •Three-phase systems •Diodes and the PN Junction •Transistor Physics: BJT/IGBT/MOSFET •Operational Amplifiers •Electronic Circuitry (Buffers, Signal Amplifiers, etc) •Transformer and Electromagnetics Basics

With extensive expertise in electrical systems, I am able to teach all aspects of electrical engineering including: - Electricity and magnetism: Laws of electricity (Ohm, Kirchhoff), electrostatics, magnetic fields. - Electrical circuits: Analysis of direct current (DC) and alternating current (AC) circuits. - Electrical machines: Transformers, direct current motors, synchronous machines and asynchronous machines. - Three-phase systems: Analysis of balanced and unbalanced three-phase systems. - Control electronics: Regulators, amplifiers, and modulation techniques. - Power quality: Harmonics, power factors and compensation. - Protection of electrical systems: Relays, circuit breakers and protection systems. - Analysis of complex electrical networks: Modeling and simulation. - On-board electronics: Applications in transport and aeronautics. - Renewable energies: Photovoltaic, wind, hydraulic and grid integration.

Hi all, My name is Mehrez, I am 25 years old and I am a doctoral student in electrical engineering. I offer private lessons, individual or in groups, at home: - Physics for high school students. - Electrical and mechanical for 3rd year and baccalaureate students. Please do not hesitate to contact me for any questions or information.

Being an associate professor and Doctor in Mechanical Engineering and Robotics, I give private lessons at the following level: * Kinematic Model Course (direct or inverse) * Dynamic Model Course (direct or reverse) * Static Model Course (direct or inverse) * Course Planning the trajectory * Robot Control Course * Programming course on Matlab or RoboStudio.

Research on business management, accounting and economics. I am a graduate of Business Management with distinction and i am capable of teaching this course fluently. General Mechanical Engineering courses..... I am a 4th year drop out of this filed but enthusiasts with the field of study. General Computer Engineering, Computer Science and Software Engineering. I am self taught compute science professional.

In these Engineering Classes, I guide, mentor, and facilitate your growth and intuitive technical understanding. I share my experiences with Aerospace/Aeronautical/Mechanical/Electrical Engineering, helping you develop your skills and techniques to tackle any problem, whilst adapting our lessons to your natural method of learning. Contact me here to introduce yourself and tell me more about the topics that you would like additional support with. This could be, for example, Aero/ Flight Dynamics, Control Systems, Dynamic Structures, Business Data Analysis, or any other topics. Whatever university you are studying at, I am certain that you will leave our sessions fulfilled, inspired, and driven to take on any challenge that may come your way. Contact me now for my availability, so that we can organize your first session as soon as possible. I look forward to meeting you! __________________________________________________________________________________ Previously supported students from top universities such as: UK: - Imperial College London (+ Business School) (ICL) - University College London (UCL) - King's College London (KCL) NL: - Delft University of Technology (TUDelft) - University of Amsterdam - University of Groningen SW - ETH Zurich - Swiss Federal Institute of Technology AU - Queensland University of Technology - University of Queensland - Griffith University __________________________________________________________________________________ A little about myself: My name is Anh; I was born and raised in the U.K. and I have over 8 years of international experience, tutoring Middle School to University Level Maths, Sciences, and Engineering, with 4 years of working experience in the Aerospace and Maritime industry. I have a fun, ambitious, and outgoing personality with a passion for music, cooking, and trying new things. Whilst teaching and mentoring, I am patient and adaptable to the needs of each of my students. I am working as an Engineering Specialist/Consultant, holding: - a degree as a Master of Aeronautical Engineering from Imperial College London, - A*A*A* A-Level Further Maths and Physics, with, - straight A*s in (GCSE) Maths, Physics, Chemistry, Biology, English, Geography. I was also previously mentored and tutored myself and having been through the problems and achievements first-hand, I want to help others do so as well.

Thermodynamics deals with heat, work, and temperature, and their relation to energy, entropy, and the physical properties of matter and radiation. The behavior of these quantities is governed by the four laws of thermodynamics. The science of thermodynamics is a very sweet and conceptual science. Many concepts that we face in reality are examined in thermodynamics. Laws of thermodynamics, entropy generation and analysis and investigation of various thermodynamic cycles, etc. are things that are taught in class. references : Cengel , Borgnakke.

I am an associate professor of electrical engineering I offer courses in everything related to the discipline of electrical engineering: CPGE / BTS / DUT / IUT / DTS / UNIVERSITY / Technical high school ARCHITECTURE OF A PROGRAMMED SYSTEM INTERNAL AND EXTERNAL APPEARANCE INPUT/OUTPUT MANAGEMENT timeouts timers, watchdog PIC 16F8X 16F8XX PROGRAMMING INTERRUPTIONS MANAGEMENT ASSEMBLER PROGRAMMING PROGRAMMING IN C MACHINE CONTROL SOFTWARE SIMULATION MPLAB MIKROC ISIS/PROTEUS

Solid mechanics is a key area of mechanical engineering which have key ingredient of mathematics and physics. I love to teach and share the knowledge gained over these years on Mathematics, Physics and various courses in mechanical engineering.

Electrical engineering: - Single-phase sinusoidal regime and three-phase sinusoidal regime - transformers - The direct current machine - The asynchronous machine - The synchronous machine Power electronics: - AC/DC converter (Rectifiers) - DC/DC converter (Choppers) - DC/AC converter (Inverters) - AC/AC converter (Dimmers) Analog and digital electronics: - Semiconductors (diodes, transistors, etc.) - Operational amplifiers - analog and digital filters - converters: CAN and CNA - Combinational circuits and sequential circuits Sensors and instrumentation. Signal processing Data transmission Automatic: - Concepts on automatic - The correctors: P, PI, PID, phase advance, phase delay, ... - Regulation and servoing Control of electrical machines: - Direct current machine control - Control of the asynchronous machine - Control of the synchronous machine Industrial automation and IT

I am a true believer in bringing academic skills and techniques to life in order to best understand and tackle future problems within the subject. Having both studied and applied teaching techniques to previous students, I pride myself on being able to identify which form of learning works best. A lesson will usually last 1-2 hours depending on the content we will be working through. The first session will be to understand what aspects of the subject(s) they understand or would like to focus on, followed by time to best identify how they learn best, allowing me to tailor the tutoring experience. After getting A*s and As in Maths, Further Maths, and Physics A-Levels, I went on to complete a bachelor's degree in Mechanical Engineering from Cardiff University. After graduating, I joined a pharmaceutical company, taking on multiple roles over the 4 years working there. With both academic and real-world knowledge in engineering and tutoring engineering, and experience in tailoring teaching methods to maximize a student's learning ability

I hold a PhD in Mechanical Engineering and currently, I am working as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology). I have extensive experience in teaching various Mechanical design packages, including LS-DYNA, ANSYS, APDL programming, ABAQUS, MATLAB, SolidWorks, Cura, and Symbolic MATLAB. Some of the finite element modeling and numerical simulations I have worked on include: - Multiscale finite element modeling for fatigue crack propagation in porous materials. - Analysis of multiple-layer sandwich structures' resistance to bird-strike impact [Read paper]. - Investigation of debonding propagation in aluminum and glass/epoxy composite joints under fatigue loading using Fracture Mechanics principles. - Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials. - Study of the effect of material type, stacking sequence, and impact location on pedestrian head injury in collisions. If you have any additional questions before starting the class, please don't hesitate to ask me. I am here to help! :)

3D Modelling Tutoring: Learn to Create in 3D Take your first steps into the world of 3D design or sharpen your skills with our personalised 3D Modelling Tutoring. Whether you're a beginner or looking to improve, we'll guide you through leading software like Onshape, Fusion360, or SOLIDWORKS. What you’ll learn: 3D geometry, texturing, lighting, and shading. Rendering and exporting models for 3D printing. Who’s it for: Beginners, students, or professionals in design, animation, or architecture. Flexible scheduling with tailored, one-on-one lessons to fit your needs.

doctoral student in engineering sciences provides support courses in analog and digital electronics at any DEUG level and engineering schools. having scientific and technical knowledge, three years of experience in the field of teaching, pedagogy and a sense of listening and analysis, I am able to help pupils and students and train them in the chapters of which they are having difficulty. for more info please contact me

Teacher of Mathematics, Physics, and Mechanical Engineering, with over 10 years of experience. Mechanical vibrations, material resistance, mechanical design, control, robotics, Dynamics, control, vibration, robotics, MATLAB and others Courses instructed: 1.Introduction to Robotics (MEE 4201) 2. Introduction to Mechatronics (MEE 1209) 3. Engineering Mechanics-I and II (Statics &Dynamics), (ME2108&ME2203) 4.Engineering Drawing (GE2207) 5. Machine Design (ME4101) 6. Automation (MEE5104) 7. Engineering Drawing II (SolidWroks), (GEN 126) 8. Robotics (MME 106, MS level)