Aero Engine Construction and Theory of Gas Turbine Engines

I give private lessons in Mathematics - Analysis - Matrices - Statistics - Algebra - Geometry - Physics - Chemistry - thermodynamics-fluid mechanics-RDM to students in French or Arabic programs. Homework help for Baccalaureate students. preparation for the competition. For more information, do not hesitate to contact me, guaranteed response in a few minutes up to 6 hours maximum.

In these Engineering Classes, I guide, mentor, and facilitate your growth and intuitive technical understanding. I share my experiences with Aerospace/Aeronautical/Mechanical/Electrical Engineering, helping you develop your skills and techniques to tackle any problem, whilst adapting our lessons to your natural method of learning. Contact me here to introduce yourself and tell me more about the topics that you would like additional support with. This could be, for example, Aero/ Flight Dynamics, Control Systems, Dynamic Structures, Business Data Analysis, or any other topics. Whatever university you are studying at, I am certain that you will leave our sessions fulfilled, inspired, and driven to take on any challenge that may come your way. Contact me now for my availability, so that we can organize your first session as soon as possible. I look forward to meeting you! __________________________________________________________________________________ Previously supported students from top universities such as: UK: - Imperial College London (+ Business School) (ICL) - University College London (UCL) - King's College London (KCL) NL: - Delft University of Technology (TUDelft) - University of Amsterdam - University of Groningen SW - ETH Zurich - Swiss Federal Institute of Technology AU - Queensland University of Technology - University of Queensland - Griffith University __________________________________________________________________________________ A little about myself: My name is Anh; I was born and raised in the U.K. and I have over 8 years of international experience, tutoring Middle School to University Level Maths, Sciences, and Engineering, with 4 years of working experience in the Aerospace and Maritime industry. I have a fun, ambitious, and outgoing personality with a passion for music, cooking, and trying new things. Whilst teaching and mentoring, I am patient and adaptable to the needs of each of my students. I am working as an Engineering Specialist/Consultant, holding: - a degree as a Master of Aeronautical Engineering from Imperial College London, - A*A*A* A-Level Further Maths and Physics, with, - straight A*s in (GCSE) Maths, Physics, Chemistry, Biology, English, Geography. I was also previously mentored and tutored myself and having been through the problems and achievements first-hand, I want to help others do so as well.

I'm an experienced tutor and Aerospace Engineer working as a control engineer in the space business. I hold a 5-year experience tutoring more than 60 engineering undergrad students, helping them understand the technical contents and prepare for their exams. I share my experiences with Aerospace/Aeronautical/Mechanical/Electrical Engineering, helping you develop your skills and techniques to tackle any problem, whilst adapting our lessons to your natural method of learning. Among the subjects I've previously taught you can find Controls, Flight Mechanics, Fluid Mechanics, Design, Aerospace Structures, among many others. I've also helped students with their dissertations and even mentored students in their transition to the profesional world. __________________________________________________________________________________ Previously supported students in Aerospace, Mechanical, Electrical Engineering, among others, from universities like: UK: - University of Bristol - Swansea University - Imperial College London (+ Business School) - University College London - King's College London NL: - Delft University of Technology SW - ETH Zurich - Swiss Federal Institute of Technology ES: - Universidad Carlos III de Madrid - Universidad Politécnica de Madrid

With 7+ years' experience in education, I have coached over 50 students to improve their academic results and boost their confidence in math and physics. My tutoring services always include a personalized plan for each student. This plan is established during the first session where I like to meet the student, better understand their difficulties and get to know their schedule. In the first session, we will: - Get to know each other. - Understand the student's strengths and identify areas for improvement. - Understand the student's needs and difficulties. - Get to know the student's schedule. - Create a tutoring plan Typically, sessions take place as follows: i. Theoretical review of complex concepts in simple terms ii. Tips for solving problems iii. Abundance of exercises from my databases (exams, exercises) If you are interested in my services, please provide the following information when contacting me: - School system (French Bac, Matu, IB, A-levels) - Location of tutoring (or video tutoring if applicable) - Number of sessions per week and preferred days and times of the week (this can also be discussed after the first session, if you prefer) Check out my profile if you want to know more about me :) See you soon, Francisco

I hold a PhD in Mechanical Engineering and currently work as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology). My extensive teaching experience covers a wide range of engineering courses, including: - Mathematics: algebra, linear algebra, probability, calculus, differential equations, intellectual math, and advanced engineering mathematics. - Mechanical Engineering: Statics, Dynamics, Mechanics of materials, Mechanical design, control, vibration, Fluid Mechanics, Thermodynamics, Heat transfer, Engineering drawing, Applied Mechanics, Composite Structures, Flight, Machine Elements, Manufacturing, 3D printing, and more. - Physics: mechanics, momentum and energy, electricity, charge and current, electric and magnetic fields, waves, particle physics, nuclear decay, astrophysics, cosmology, oscillations, etc. - CAD/CAM Software: Autocad, Solidworks. - Mechanical Design Packages: ANSYS, APDL programming, ABAQUS, MATLAB, Symbolic MATLAB, LS-DYNA. My research and teaching interests are diverse, including: • Additive manufacturing • Mechanical metamaterials • Acoustical metamaterials • Electromagnetic metamaterials • Aeroacoustics • Soft matter and soft robotics • Fatigue and fracture mechanics • Experimental mechanics • Multiscale numerical modelling • Biomaterials • Porous materials • Manufacturing of medical devices and implants • Deep learning • Image processing • Topology optimization • Origami and Kirigami structures • Self-folding and self-assembly structures • Tissue engineering • Permeability in porous materials • Fluid-Solid Interaction I understand that not all teachers excel in teaching Engineering and Mathematics courses and explaining their importance to students. Courses with strong mathematical backgrounds may become boring for students who lack a solid mathematical basis. To address this, I take a student-centered approach, starting from the basics to actively engage all students, including those with weaker mathematical backgrounds. I also provide practical examples to demonstrate the real-world significance of what they are learning, inspiring and fostering their interest in the subject matter. If you have any additional questions before starting a class, please feel free to ask me. I am here to assist! :)

These courses provide a comprehensive understanding of the fundamental principles of thermodynamics and fluid mechanics, emphasizing real-world applications in engineering, physics, and environmental systems. Students will develop problem-solving skills through theoretical concepts, numerical examples, and interactive simulations. Key Topics Covered: Thermodynamics: Laws of thermodynamics (Zeroth, First, Second, Third) Thermodynamic systems & processes (isothermal, adiabatic, etc.) Entropy, enthalpy, and heat engines PV diagrams & cycle analysis (Carnot, Rankine, Brayton) Phase transitions & properties of pure substances Fluid Mechanics: Fluid properties (viscosity, density, pressure) Bernoulli’s equation & conservation laws Laminar vs. turbulent flow (Reynolds number) Boundary layers, drag, and lift forces Pipe flow analysis & pump systems

===================Satisfied or refunded======================= Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming). Computational Sciences and Technology SNT IS engineering sciences Numerical and computer science SNI Digital electronics Analog electronic electromagnetism Signal processing and data acquisition Automatic (discrete, continuous) electrical engineering (transformers, electrical machines, switching power supply) C/C++ Programming, Assembler, ARM, STM32 renewable energy (wind, PV-solar) RDM - strength of materials mechanics of solids Python and SYSML PIC microcontroller Microprocessor MATLAB, proteus Preparation for competitions Supervision of graduation projects CAPLP Electrotechnical and Electronic Electrical Engineering CAPLP and BTS subjects and answers Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020 CORRECTION OF BTS TESTS

Hi, I offer courses in mathematics, physics, as well as mechanical engineering courses for all levels (high school and university). As an engineer with a doctorate in mechanical engineering, I have a solid experience in teaching and I am passionate about supporting pupils and students towards success. Whether you are looking for academic support, exam preparation, or to deepen your knowledge in these subjects, I am here to help you with teaching methods adapted to your needs. Feel free to contact me for more information !

Hello everyone and have a nice day, As a teacher, teacher, student, teacher, professional teacher, and professional student/coaching/unterstützung in MATLAB/Simulink/embedded programme/automatic code generation...etc., you can also contact him. Use this device for your Master Elektrotechnik-Ingenieur with a new academic design and installation tool in the basic model and use the Matlab/Simulink-Model for embedded System and Regelung on the E-Motoren with a fan and pass it. and Anforderungen. For more information, please contact us. Unterstützung professionelle in Matlab, Simulink, C, Microcontroller and embedded Programmierung an. There is a lot of expertise in this article, too: - Matlab, Simulink, - S-Functions, Simulink Modelle, Model Basierte Programmierung and Code Generation, - Electrical drives and E-Motoren, - STM32 Microcontroller, - Rapid Prototyping mittels dSPACE HiL-Systeme and Echtzeit-Systeme, - Power electronics / Leistungselektronik, - Betreuung and Unterstützung während verschiedenenenenenen der projecterbeiten, - ... There is a lot of contact with you. Very nice greetings

Are you in preparatory classes (CPGE) and want to excel in Engineering Sciences? I offer personalized courses to support you in key subjects, with a pedagogy adapted to your academic needs and your objectives. Modules taught: 🔧 Strength of Materials (RDM): Analysis of stresses, deformations and dimensioning of structures. ⚙️ Elasticity: Study of elastic solids and resolution of stress and deformation problems. 🌊 Fluid and solid mechanics: Fundamental concepts and applications in the field of fluid structures and systems. 💻 Industrial computing: Programming, automation and simulation of industrial systems. Highlights of my courses: ✔️ Methodical and structured approach adapted to the CPGE program. ✔️ Typical exercises and solving complex problems. ✔️ Specific preparation for competitive examinations for major engineering schools. ✔️ Clear and detailed teaching materials provided in each session. For who ? 🎓 Students in scientific preparatory classes (CPGE). 🏫 Students and professionals looking to strengthen their knowledge in SII. Course organization: Format: Individually or in small groups. Modalities: Online or in person depending on your preferences. Flexibility: Classes tailored to your schedule.

I am doing a PhD. I can explain everything in the mechanical engineering curriculum, such as thermodynamics, work transition, fluid mechanics, mechanics, Autocad, NX, Solidworks, Matlab, Ansys. Also math, linear algebra, differential equations. I have been working as a research assistant for five years.

Associate professor giving support courses in the subjects of Physics and Engineering Sciences dedicated to students in Technical Baccalaureate, Higher Technician Certificate BTS and in CPGE preparatory classes (MPSI, TSI, PSI). The objective is to strengthen your foundations and deepen your knowledge to succeed in your DS and exams. 1. Industrial sciences: Analytical and graphical statics - Kinematics - Kinetics - Dynamics - Energetics Automatic Linear - servo control Industrial design - theory of mechanisms 2. Physics: Thermodynamics - electrokinetics - mechanics of the material point and of non-deformable solids.

Engineering drawings are used to communicate design ideas and technical information to engineers and other professionals throughout the design process. An engineering drawing represents a complex three-dimensional object on a two-dimensional piece of paper or computer screen by a process called projection.

Individual learning support for aviation theory and piloting. Help with preparation for theoretical knowledge exams. Advice for flight training and skills tests (practical flight exams) including typical challenges and scenarios. Advanced tutoring in Flight Operations (MB, PERF, FPM, OPS). Covers all EASA ATPL(A) subjects: - Air Law - Aircraft General Knowledge - Instrumentation - Mass & Balance - Performance - Flight Planning & Monitoring - Human Performance & Limitations - Meteorology - General Navigation - Radio Navigation - Operational Procedures - Principles of Flight - Communications

Unlock the Potential of Mathematics with an Experienced PhD Educator! Online Are you or your child struggling with understanding complex mathematical concepts? Look no further! I am Dr. Siva, an accomplished PhD holder in Engineering. As a Chartered Engineer and Scientist, I bring a wealth of knowledge and expertise to the world of education. With over 15 years of teaching experience, I have honed a unique and modern teaching approach that utilizes cutting-edge digital tools and the latest insights from brain science. My focus is on ensuring knowledge retention through repetitive problem-solving techniques, empowering students to apply their learnings to real-world scenarios effectively. **Why Choose Me:** - Expertise in Teaching: As a university educator, I have a proven track record of nurturing students' intellectual growth and academic excellence. - Versatility: From university scholars to school students, I can adapt my teaching style to cater to any level of learning. - Global Reach: No matter where you are in the world, I offer online tutoring sessions for your convenience and accessibility.